47
7. REMOTE SYSTEM ACCESS
7.1 Direct Inward System Access (DISA)
DISA (Direct Inward System Access) allows remote users to
gain access to the system’s resources (remote users may be
required to enter an Authorization Code). The system will
recognize remote user dialed inputs (call other stations, place
calls over CO/IP lines, review voice mails, etc).
To access system resources remotely:
• Call the system’s DISA facility,
• Await answer and dial your authorization code (station
number and password),
• Dial “*” for end mark,
• Dial as needed for the desired system resource.
7.2 Mobile Phone Extension
When away from your desk or office you can place and
receive calls on a registered mobile phone. You may need to
activate the Mobile Phone Extension feature and assign the
Mobile Phone number.
To use Mobile extension, you have to admin ‘Mobile Extension
Table (PGM 236)’.
1) PGM Auth: Enable.
2) Usage: Enable.
For more admin options, you ask your sy
stem administrator.
This feature is only effective with an ISDN/VOIP CO line.
To register a mobile phone number:
• Press the TRANS/PGM button,
• Dial 37,
• Dial the mobile phone number,
• Press the
HOLD/SAVE
button.
To activate a registered mobile phone:
• Press the TRANS/PGM button,
• Dial 38,
• 1 to activate, 0 to deactivate,
To Next Page
Loading...
Need help?
General
