45
CALL BACK button To retrieve Voice Mail locally using
the (9240D):
• Press the
CALL BACK
button, the LCD shows the Message
Summary display:
1. ICM MWI(000)
2. CLI MSG(000)
3. VSF MSG(001)
4. VMS MSG(001)
5. UMS MSG(000)
6. SMS(00)
SELECT (1-6)
• Select ‘3. VSF MSG(System Voice Mail)’ or ‘4. VMS MSG
(Commercial Voice Mail)’ to use the navigation Up/Down key,
OK button. • Press the OK soft button or
• Dial desired option codes,
• After the prompt enter your station number and password,
• At
completion of session, hang-up to return to idle.
Your system administrator may program your system to
skip selecting 3 for VSF or 4 for VM.
To access your Voice Mail Box from a Remote Location:
• Lift the handset,
• Dial the telephone number of a DISA CO line answered by the
VSF/ Auto Attendant,
• At answer, dial # to receive the ‘Station number & Password’
prompt,
• Dial desired option codes after Voice prompt,
• At completion of session, hang-up.
6.3 Sending and Receiving Short Text Messages
You can exchange short text messages (up to 80 alpha numeric
characters) with other display phone users. These messages
will activate the message on the LCD. If the ring/message LED
is set to Message Wait indication, the ring/message LED of Call
Back button will flash.
To send an SMS message to another Phone:
• Press the TRANS/PGM button,
• Dial 36 (SMS send code),
• Dial 1 to resend an existing message, or 2 to send a new or
edit an existing message,
To Next Page
Loading...
Need help?
General
