57
APPENDIX A USER PROGRAM CODE
Fixed Function Codes, refer to Table A-1 and A-2, are digit
sequences users and the Attendant may dial while in the User
Program Mode to assign certain Flex buttons and affect the status
of a feature or setting. For more information on the User Program
Mode, refer to the iPECS Features and Operation Manual.
Many of these Function Codes may be assigned to a button of LDP
Phone by pressing the [PGM] button as the first entry of a Flexible
button assignment, see Flex button Programming in the iPECS
Features and Operation Manual.
Note) some codes may not be available according to the system.
Table A-1 STATION USER PROGRAM FIXED FUNCTION CODES
CODE FUNCTION
10 En-block Dialing (1: ON, 2: OFF)
11X Intercom Differential Ring ( X = 1-15 )
12X CO Line Differential Ring ( X = 1-15 )
13 Intercom Answer Mode (1: HF/2: TONE/3: PV)
14X Call Coverage Attribute (1: On/Off, 2: Ring Delay)
15X Station Ring download (Not available)
19 Ear Mic. Headset (1: ON, 2: OFF)
21 Knock Down Station COS (ICM only mode)
22 Restore Station COS (Enter Station No. & Password)
23 Walking COS
24 ICR scenario (0-9)
25 LIP Keyset Stat (Not available)
26 Call profile (Table index (0-3)
30 VM Mobile Notify (1: ON, 2: OFF)
31 Message Retrieve Method (9240D is not available)
32 Message Retrieve Example (9240D is not available)
33 User Authorization Code Registration (Station No.
& Password)
34 Call Wait (0: OFF, 1: ALL, 2: External, 3: Internal)
35 Message Wait in Executive/Secretary pair (1: ON, 2: OFF)
36 Send SMS Message (1: Resend, 2: Edit)
37 Register Mobile Extension (via Web admin)
38 Make Mobile Extension active (via Web admin)
39 Register Mobile Extension CLI (via Web admin)
41 Set Wake-Up Time (HH:MM)
42 Wake-Up Time Disable (Press [Save] button to erase
To Next Page
Loading...
Need help?
General
