40
• Dial the Conference Room password.
Or, press a preprogrammed Conf button.
To transfer a call to a Conference Room:
• Press the TRANS/PGM button,
• Dial 59 (Conference Room Entry code),
Or, Press a Conference Room flex button,
• Hang up.
To delete a Conference Room:
•
Press the TRANS/PGM button,
• Dial 54 (Conference Room delete code),
• Dial the Conference Room number (1-9),
• Dial the Conference Room password (5 digits),
• Press HOLD/SAVE to delete the Conference Room.
5.5 Call Park: Placing a call on Hold to Page
A user may transfer an active CO/IP call to a special holding
location (Park Orbit), which can be accessed easily from any
station in the system. Typically, this feature is used with
Paging to notify the desired user of a parked call.
Parked calls are subject to Hold Recall after the Call Park timer.
To park an active external call:
• Press TRANS/PGM,
• Dial the Park Orbit (eMG80:#601-#619, eMG800/
UCP:#601-#800),
Or, press a Park Orbit flex button,
• Return to idle.
To retrieve a parked call:
• Lift the handset,
• Dial the Park Orbit.
To Next Page
Loading...
Need help?
General
