32
S_SPD, DIAL BY SYS SPD NAME, and PUBLIC
DIRECTORY mean the system speed
information.
User can assign Station Speed Dial numbers at his/her phone.
Only
an Attendant can assign System Speed Dial numbers
via Web Admin (System Data > System Speed Dial).
4.3.1 Using Last Number Redial (LNR)
The last number dialed on an external call is automatically
saved in the Last Number Redial (LNR) buffer. The system will
store the numbers dialed on the last calls.
To dial the Last Number for an external call:
• Lift the handset,
• Press the SPEED button,
• Dial *,
Or,
• Press the Redial Soft button,
• Press the Volume up and down buttons to select from the last
numbers dialed or received,
• Press the OK Soft button or
HOLD/SAVE
button.
4.3.2 Using and Entering Saved Number Dial
You may store the last number dialed on an external call to the
Saved Number Dial buffer for convenient dialing at a later
time. The Saved number is stored until a new number is saved.
To store the last number on an external call:
• Lift the handset,
• Press
the desired external number and starting conversation,
•
Press the SPEED button two times during conversation,
To place a call using Save Number Dial:
• Lift the handset,
• Press the SPEED button,
• Dial #.
To Next Page
Loading...
Need help?
General
