24
3.8.2 Forwarding calls to an external number
Forward calls to an external destination; calls can be
forwarded from an internal station or a remote location. You
may define the conditions or ‘type of forward’ as listed below:
1: Unconditional—all calls
to the station, except recalls, are
forwarded.
2: Busy—Immediately forwards all calls to the station, except
recalls, when station is busy.
3: No Answer—forwards all calls to the station, except
recalls, when the station does not answer within the
No Answer timer.
4: Busy/No Answer—forwards calls if the station is busy or
does
not answer within the No Answer timer.
When you forward calls from a different station or a remote
location, you may need to enter your Authorization Code. In
addition, from a remote location, you must access the system
through a DISA enabled CO line.
To activate Call Forward, Off Premise (forward to an
external number) from your phone:
FWD button,
• Lift the handset,
• Press the Forward Soft button or the
• Dial the type of Forward code (1-4),
• Press SPEED button,
• Dial Speed Dial bin number,
• Replace the handset, return to idle.
To activate Call Forward, Off Premise (forward to an
external number) from a different phone within the System:
FWD button,
• Dial your Authorization code (your station number &
Password),
• Lift the handset,
• Press the Forward Soft button or the
• Dial 0 (Remote Call Forward code),
• Dial the type of Forward code (1-4),
• Press SPEED button,
• Dial Speed Dial bin number,
• Replace the handset, return to idle.
To Next Page
Loading...
Need help?
General
