LG KD-36D - Auto Call Number Redial; Queuing; Executive;Secretary Transfer

● DIGITAL KEY TELEPHONE / USER’S GUIDE KD, KD/E, LKD Series
When the called party is busy or does not answer the call the system can automatically redial
Auto Call Number Redial (＊)
Button Procedures
Range
● Press REDIAL button.
● Hang up.
● A busy or no answer number will be redialed automatically after
pre-programmed time interval while MUTE button is lighting.
● When called party answers, lift handset to talk.
When
the
called
party
is
busy
or
does
not
answer
the
call
,
the
system
can
automatically
redial
the number by pre-programmed time interval.
CO Line F
e
Queuing (＊)
Button Procedures
Range
When a CO line is busy, you can request a call back when the CO line is available. As soon as it
becomes idle, you can be the first extension to get the CO line.
e
atures
● Lift handset or press MON/SPEAKER button.
● Press busy outside line button or specific line group button.
● Pressing CALLBK button, your CALLBK button is lighting and
confirmation tone is heard.
● Hang up or press MON/SPEAKER button.
To answer a queue request,
● When the busy CO line or specific line group returns to idle,
you hear ring and the queued line button is flashing
you
hear
ring
and
the
queued
line
button
is
flashing
.
● Lift handset and dial a desired phone number.
Button Procedures
Range
Executive/Secretary Transfer (＊)
● When the Executive Station is busy or DND (Do Not Disturb),
all calls will go to the Secretary Station.
● The Secretary Station may signal the Executive Station that is
in DND by using Call Wait feature. (Press * key or dial the last
digit of the number of Executive station or press the DSS
button to operate Call Wait feature.)
11