LG KD-36D - Traffic Analysis; Erasing Station Message

● DIGITAL KEY TELEPHONE / ATTENDANT OPERATION KD, KD/E, LKD Series
Th t ill it th t d d i t ffi d t hi h b i t d
Traffic Analysis (＊)
A
t
Th
e sys
t
em w
ill
mon
it
or
th
e sys
t
em an
d
recor
d
var
i
ous
t
ra
ffi
c
d
a
t
a w
hi
c
h
can
b
e pr
i
n
t
e
d
upon
request. The information can be used to determine whether the circuits installed in the system
are adequate.
When enabled, it will continue to monitor the traffic until disabled. The traffic data is collected and
sent to the RS232C port upon request. The collected traffic data contains two types of traffic data.
The first type is peg counts which give an actual count of the number of times a particular
operation has occurred. Peg counts are given in absolute values from 00000 to 99999. The
second type of data is usage times which give the average percent occupancy of a device, i.e.,
stations, CO lines, DTMF receivers, etc. Usage times are given in seconds from 00000 to
99999 Counts and times are cumulative from the time the monitoring is activated and are reset
t
tendant Operat
Button
Procedure
To start the traffic analysis at system attendant,
● Press TRANS/PGM button.
● Dial # 7 1.
● Press HOLD/SAVE button.
To stop the traffic analysis at system attendant
99999
.
Counts
and
times
are
cumulative
from
the
time
the
monitoring
is
activated
,
and
are
reset
by initiating the start up procedure again.
ion
To
stop
the
traffic
analysis
at
system
attendant
,
● Press TRANS/PGM button.
● Dial # 7 2.
● Press HOLD/SAVE button.
To print the result of traffic analysis at system attendant,
● Press TRANS/PGM button.
● Dial # 7 3.
● Press HOLD/SAVE button.
To abort printing at system attendant
To
abort
printing
at
system
attendant
,
● Press TRANS/PGM button.
● Dial # 7 4.
● Press HOLD/SAVE button.
Erasing Station Message (＊)
Button
Procedure
The attendant can cancel the features, DND CALL FORWARD and preselected message
activating at other station.
● Press TRANS/PGM button.
● Dial * 9.
● Dial the desired station range to be canceled.
● Press HOLD/SAVE button.
53