LG KD-36D - Attendant Intrusion; Day;On-Demand;Night Mode Service (Manual;Automatic)

● DIGITAL KEY TELEPHONE / ATTENDANT OPERATION KD, KD/E, LKD Series
Attendant Intrusion
Attendant may intrude into any station which is in conversation with a CO line
A
t
Button
Procedure
To assign a flexible key as the Intrusion button (Not available in GDK-16/20W),
● Press TRANS/PGM button.
● Press the desired flex. key to be registered.
● Press TRANS/PGM button.
● Dial 8 6.
● Press HOLD/SAVE button.
Attendant
may
intrude
into
any
station
which
is
in
conversation
with
a
CO
line
.
t
tendant Operat
To activate attendant intrusion (GDK-186/100/34i),
● Press DSS button corresponding to the busy station you wish to call.
(Busy tone is heard.)
● Press ATD INTRUSION button.
(Intrusion warning tone is heard in the busy station, then a 3-way
conference is set up.)
To activate attendant intrusion (GDK-16/20W),
●
Press CO button you wish to converse.
ion
Press
CO
button
you
wish
to
converse.
(If intrusion is allowed by Admin program, then 3 way conversation is set
up. If intrusion is not allowed, busy tone will be heard.)
● System Base Program (Main Menu 5) - System Attribute (Sub Menu 1)
- Privacy (Terminal Menu 2)
Day/On-demand/Night Mode Service (Manual/Automatic)
To activate/deactivate Day/Night/On-demand mode manually,
P
DND/FWD
btt t tt d t tti
Button Procedures
The attendant station can be placed into night service mode allowing ring assignments and
answering privileges to station not having the privileges in the day mode. Or, can be placed
into on-demand service mode allowing ring assignments and answering privileges to station not
having the privileges in the night mode.
(In GDK-16, only Day/Night mode change is available by pressing DND button at attendant station.)
●
P
ress
DND/FWD
b
u
tt
on a
t
a
tt
en
d
an
t
s
t
a
ti
on.
● Then, DND/FWD button is flashing. (The system is placed into On-demand
mode.)
● If pressing the DND button once more, then the system is placed into Night
service mode.
● On-demand mode is not activated automatically.
To change Day/Night mode automatically,
● Press TRANS/PGM button.
●
Dial
#9
48
●
Dial
#
9
.
● Enter DAY TIME + NIGHT TIME, or DAY TIME + * or * + NIGHT TIME .
(Enter as HHmm (HH= hour 00~23, mm= minute 00~59))
● Press HOLD/SAVE button.