LG KD-36D - Conference

● DIGITAL KEY TELEPHONE / USER’S GUIDE KD, KD/E, LKD Series
Button
Procedures
Range
Conference
Button
Procedures
Range
To establish a conference,
● Call desired party. (internal or outside)
● Press CONF button. (CONF button is lighting and the called
party is put on exclusive hold.)
● Call the next party.
● Press CONF button twice. (once if adding additional parties)
● Conference is established.
GDK-16/20W:
At most 3 parties
can be active in
a conference.
To add another party in the conference,
(not available in GDK-16/20W)
● Press CONF button.
● Call the next party.
● Press CONF button twice.
To exit a conference (unsupervised),
● Press CONF button in the supervisor station and hang up.
Other parties are still connected.
Re-entering a conference,
● Lift handset or press MON/SPEAKER button.
● Press CONF button.
To drop an outside party, (not available in GDK-16/20W)
(You should be active in the conference.)
● Press outside line of party you wish to drop.
● Hang up or press MON/SPEAKER button.
To terminate the conference,
● Hang up or, press CONF button if unsupervised.
On LKD-2N/S, 8D/S,
● Conference feature can be accomplished by programming
a flexible key as CONF button (TRANS + 91).
System Featu
r
25
r
es