● DIGITAL KEY TELEPHONE / USER’S GUIDE KD, KD/E, LKD Series
User Custom Message Programming (*)
Y t 00 t b di l d th LCD f th h lli
Button Procedures
● Press TRANS/PGM button and dial 4 8 at the station.
(Confirmation tone is heard.)
● Enter the message. (up to 24 letters using the code in “Storing
Dial by Name”)
● Press HOLD/SAVE button.
Range
ou may program a cus
om message
o
e
sp
aye
on
e
o
e p
one ca
ng your
station.
Button Procedures
Range
Background Music
A station can receive audio, generally music from an internal or external source while idle.
.
● Dial 7 3 .
● Internal BGM is heard.
● Pressing TRANS/PGM + 7 3, the selected music is changed by
turns. (Channel 0: BGM is not heard.)
● The default setting is assigned by PGM 41-BTN 1.
~
100 : 0~9
34i : 0~9
16/20w : 1~3
DISA (Direct Inward System Access)
● Dial the CO access code after hearing dial tone or voice guide
from DVU.
● Or, dial the CO access code after dialing the programmed
authorization code (when needed) for outgoing call.
Button Procedures
Outside caller can access a CO line which is programmed as DISA line.
Range
System Featu
33
es