Operation - Mass Concentration Mode
5HY 5-29
OUTPUT SETUP
The Print configuration has several options for printing the data that the
user sets on the Printer Setup screen shown in Figure 5-34.
Figure 5-34 Printer Setup Screen
• Output on Sample / Output on Alarm - When Output on
Sample is enabled, a single record will print at the end of every
sample.
When Output on Alarm is enabled, a single record printout will
print at the end of any sample that experiences an alarm condition.
• Model Name - When enabled, the Model name of the instrument
will print in the header of all printouts.
• Serial Number - When enabled, the Serial Number of the
instrument will print in the header of all printouts.
• Separator - When enabled, a line separator will print after the
Model Name and Serial Number in the header of all printouts.
Note:
You can select
both Differential and
Cumulative printing at the
same time. For normalized
values with more than 8
digits, only the whole
number will be printed.
Press BACK to return to the Configuration screen or press MAIN to
return to the MAIN screen.
To Next Page
Loading...
