Lighthouse Handheld 3016 IAQ - Output Setup

Lighthouse HANDHELD 3016 IAQ Gen E Operating Manual
4-32 5HY
OUTPUT SETUP
The Print configuration has several options for printing the data that the
user sets on the Printer Setup screen shown in Figure 4-37.
Figure 4-37 Printer Setup Screen
• Output on Sample / Output on Alarm - When Output on
Sample is enabled, a single record will print at the end of every
sample.
When Output on Alarm is enabled, a single record printout will
print at the end of any sample that experiences an alarm condition.
• Model Name - When enabled, the Model name of the instrument
will print in the header of all printouts.
• Serial Number - When enabled, the Serial Number of the
instrument will print in the header of all printouts.
• Separator - When enabled, a line separator will print after the
Model Name and Serial Number in the header of all printouts.
Note:
You can select
both Differential and
Cumulative printing at the
same time. For normalized
values with more than 8
digits, only the whole
number will be printed.
• Differential / Cumulative Toggle - This toggle option specifies
how the data will appear on the printouts.
Press BACK to return to the Configuration screen or press MAIN to
return to the MAIN screen.