Lighthouse HANDHELD 3016 IAQ Gen E Operating Manual
4-22 5HY
Alarm Acknowledge
Note: If alarms are
enabled on two channels,
when the user presses the
Alarm Acknowledge button
after the first channel goes
into alarm, the alarm will
not sound if the second
channel’s threshold is
reached within the sample
period.
When the instrument beeps in response to the Alarm and Threshold
settings, it can be silenced by tapping anywhere on the screen while the
unit is sampling.
After acknowledging the alarm, the alarm count will reset when the
next sample cycle begins.
Clear Buffer
Press the Clear Buffer button to clear the instrument’s data buffer. See
Figure 4-23.
Figure 4-23 Clear Buffer message screen
Press OK to clear the data or press Cancel to exit screen without
clearing the data.
To Next Page
Loading...
