Operation - Particle Mode
5HY 4-23
DEVICE
SETUP
Device Setup includes setting the instrument’s date and time, adjusting
the instrument’s LCD contrast or beep volume, aligning the
touchscreen, enabling autostart, setting the instrument’s
communications address, setting print options, enabling password
restrictions, viewing the instrument’s current status, and/or (with
proper authorization) adjust service settings. See Figure 4-24.
Figure 4-24 Device Setup options
CLOCK
Use the Clock screen to set the instrument’s date and time. See Figure
4-25.
Figure 4-25 Date & Time Configuration Screen
Set the instrument’s Date by entering values for the desired month, day
and year and then press the ENTER button.
To Next Page
Loading...
