Operation - Particle Mode
5HY 4-39
LOCATION The HANDHELD allows up to 200 different locations and associated
alphanumeric labels.
Press the LOC button on the Configuration screen to display the Select
Location screen as shown in Figure 4-47.
Figure 4-47 LOCATION Setup Screen
On the Select Location screen, the Location name can be selected using
the UP and DOWN arrows or by touching the location name on the
screen.
The following options can be enabled to configure locations for the
HANDHELD.
• When enabled, the Auto Increment option will automatically select
the next location after completing the programmed number of
cycles. The default position is “off” when the unit is powered up.
• The unit can be configured for a maximum of 200 Locations. Each
location name can be configured with a maximum of 8 characters
per name.
• Recipes associated with a specific location are denoted by an
asterisk (*) to the right of the location name.
To Next Page
Loading...
