Lighthouse HANDHELD 3016 IAQ Gen E Operating Manual
5-20 5HY
Clear Buffer
Press the Clear Buffer button to clear the instrument’s data buffer. See
Figure 5-20.
Figure 5-20 Clear Buffer message screen
Press OK to clear the data or press Cancel to exit screen without
clearing the data.
DEVICE
SETUP
Device Setup includes setting the instrument’s date and time, adjusting
the instrument’s LCD contrast or beep volume, aligning the
touchscreen, enabling autostart, setting the instrument’s
communications address, setting print options, enabling password
restrictions, viewing the instrument’s current status, and/or (with
proper authorization) adjust service settings. See Figure 5-21.
Figure 5-21 Device Setup options
To Next Page
Loading...
