Lighthouse Handheld 3016 IAQ - Mass Mode: Configuration Settings

Lighthouse HANDHELD 3016 IAQ Gen E Operating Manual
5-10 5HY
CONFIGURATION
Screen
Press CFG on the MAIN screen to display this screen. See Figure 5-8.
Figure 5-8 Configuration Screen
Data Setup includes buttons to enable/disable analog channels, set
sample record parameters, sample settings, thresholds, enable/disable
alarms, and clear the data buffer.
Device Setup includes buttons to configure the instrument’s date and
time, set the LCD contrast, adjust the instrument’s beep volume, enable
the instrument to AutoStart, set the instrument’s communication
address, setting print options, enable password restrictions, and/or
(with proper authorization) adjust service settings.
DATA SETUP
Figure 5-9 Data Setup options