Operation - Mass Concentration Mode
5HY 5-11
Analog Channels
A Temperature and Relative Humidity probe can be connected to the
HANDHELD via a connector on the top of the unit.
Users can select if the HANDHELD displays analog temperature data
as Fahrenheit or Celsius by pressing the ANALOG button on the
Configuration screen. The Select Temperature Units window displays.
There are two buttons on the Select Temperature Units window. The
button displayed shows the units that are currently selected: F for
Fahrenheit and C for Celsius.
To change to Celsius, press the C button. To change to Fahrenheit,
press the F button. See Figure 5-10 & Figure 5-11.
Figure 5-10 Analog Channels - Select Celsius Units
Figure 5-11 Analog Channel - Select Fahrenheit Units
To Next Page
Loading...
