Operation - Particle Mode
5HY 4-13
Temperature and relative humidity values appear on the MAIN screen
with the units you selected. The values are updated in real time as
shown in Figure 4-14.
Figure 4-14 Analog data on MAIN screen
When the unit is not counting or when it is holding, you can zoom on
the instrument’s current Analog data display. Press anywhere in the
Particle Data area to bring up the Zoomed Data View, then press the
Analog toggle button to display Analog data. See Figure 4-15.
Figure 4-15 Zoomed Data View: Analog data
To Next Page
Loading...
