HDMI-TPS-RX110AY – User's Manual 55
Mute Input Port
Command format: ●
n
Response format: mO●
Example:
˃ CALL /MEDIA/AUDIO/XP:muteSource(I1)
˂ mO /MEDIA/AUDIO/XP:muteSource
Unmute Input Port
Command format ●
n
Response format: mO●
Example:
˃ CALL /MEDIA/AUDIO/XP:unmuteSource(I1)
˂ mO /MEDIA/AUDIO/XP:unmuteSource
Mute Output
Command format ●
n
Response format: mO●
Example:
˃ CALL /MEDIA/AUDIO/XP:muteDestination(O1)
˂ mO /MEDIA/AUDIO/XP:muteDestination
Unmute Output
Command format ●
n
Response format: mO●
Example:
˃ CALL /MEDIA/AUDIO/XP:unmuteDestination(O1)
˂ mO /MEDIA/AUDIO/XP:unmuteDestination
Analog Audio Output Level Settings
Command format: SET●
n
Response format: pw●
n
Parameters:
Example:
˃ SET /MEDIA/AUDIO/O2.VolumedB=-15
˂ pw /MEDIA/AUDIO/O2.VolumedB=-15.00
ommand format: SET●
n
Response format: pw●
n
Parameters:
Example:
˃ SET /MEDIA/AUDIO/O2.VolumePercent=50
˂ CHG /MEDIA/AUDIO/O2.VolumePercent=50.00
˂ CHG /MEDIA/AUDIO/O2.VolumedB=-7.85
Balance
Command format: SET●
n
Response format: pw●
n
Parameters:
Example:
˃ SET /MEDIA/AUDIO/O2.Balance=0
˂ pw /MEDIA/AUDIO/O2.Balance=0
Sets the output volume (attenuation) between -95.625 dB and 0 dB in step of
-0.375 dB. The value is rounded up if necessary to match with the step value.
Sets the output volume (attenuation) between 100% and 0%, in step of 1%. The
value is rounded up if necessary to match with the step value.
Sets the balance; -100 means left balance, 100 means right balance, step
is 1. Center is 0 (default).
To Next Page
Loading...
Need help?
General
