Lightware HDMI-TPS-RX110AY

 HDMI-TPS-RX110AY – User's Manual 53
Test Pattern
Command format: SET●
n

Response format: pw●
n

Parameters:
<pattern>
RED GREEN    RAMP CHESS BAR 
Cycle setting means all the patterns are changed sequentially approx. in every 2 seconds.
Example:
˃ SET /MEDIA/VIDEO/O1.TpgPattern=GREEN
˂ pw /MEDIA/VIDEO/O1.TpgPattern=GREEN

Command format: SET●
n

Response format: pw●
n

Parameters:
.HdmiModeSetting 0 1 2
HDMI mode Auto HDMI 
Example:
˃ SET /MEDIA/VIDEO/O1.HdmiModeSetting=2
˂ pw / MEDIA/VIDEO/O1.HdmiModeSetting=2

Command format: GET●
n
.tpsMode
Response format: pr●
n

Parameters:
.tpsMode A H L 1 2
TPS mode Auto HDBaseT   
Example:
˃ GET /REMOTE/S1.tpsMode
˂ pr /REMOTE/S1.tpsMode=H
See more information about TPS modes in the TPS Interface section.
TPS Mode Settings
Command format: SET●
n

Response format: pw●
n

Parameters: See at previous section.
Example:
˃ SET /REMOTE/S1.tpsModeSetting=A
˂ pw /REMOTE/S1.tpsModeSetting=A



