Lightware MMX2 Series User Manual

 MMX2 series – User's Manual 73

Deleting an EDID from User Memory
ɯ  <ip>
ɯ body: <user_edid>
Resetting the Emulated EDIDs
ɯ  <ip>

Setting the DHCP State
ɯ  <ip>
ɯ body: <dhcp_status>
Changing the IP Address (Static)
ɯ  <ip>
ɯ body: <IP_address>
Changing the Subnet Mask (Static)
ɯ  <ip>
ɯ body: <netmask>
Changing the Gateway Address (Static)
ɯ  <ip>
ɯ body: <gw_address>
Applying Network Settings
ɯ  <ip>
Setting the Hostname
ɯ  <ip>
ɯ body: <unique_name>
Network Security

ɯ  <ip><ethernet_port>
ɯ body: <status>

ɯ  <ip><port>

ɯ  <ip><port>
ɯ body: <status>

ɯ  <ip>
Setting Password for Authentication
ɯ  <ip>
ɯ body: <password>
Enabling Authentication
ɯ  <ip><port>

ɯ body: <status>

BAUD Rate Setting
ɯ  <ip><serial_port>
ɯ body: <baudrate>
Stop Bits Setting
ɯ  <ip><serial_port>
ɯ body: <stopbits>

ɯ  <ip><serial_port>
Parity Setting
ɯ  <ip><serial_port>
ɯ body: <parity>

ɯ  <ip><serial_port>
Enabling the Serial over IP Port
ɯ  <ip><serial_port>
ɯ body: <state>
Serial Port Messaging
Sending a Message via RS-232
ɯ  <ip><serial_port>
ɯ body: <message>

Setting the Direction of a GPIO Pin
ɯ  <ip><pin>
ɯ body: <dir>





Lightware MMX2 Series Specifications

General

Brand	Lightware
Model	MMX2 Series
Category	Matrix Switcher
Language	English