UCX series – User's Manual 65
Set the Autoselect Policy
Command and Response
ç SET·/V1/MEDIA/VIDEO/AUTOSELECT/<out>.Policy=<autoselect_mode>
æ pw·/V1/MEDIA/VIDEO/AUTOSELECT/<out>.Policy=<autoselect_mode>
Parameters
Parameter Parameter description
<autoselect_mode> The autoselect policy
Off
The autoselect function is disabled.
Last Detect
Always the last attached input is switched to
the output automatically.
First Detect
Example
ç
æ
Change the Autoselect Included Input Ports
Command and Response
ç SET·/V1/MEDIA/VIDEO/AUTOSELECT/<out>/<in>.Included=<state>
æ pw·/V1/MEDIA/VIDEO/AUTOSELECT/<out>/<in>.Included=<state>
Parameters
Parameter Parameter description
<state> The chosen input is ignored from the
autoselect process or not.
true
The port is included in autoselect.
false
The autoselect function ignores that port.
Example
ç
æ
Change the Input Port Priority
Command and Response
ç SET·/V1/MEDIA/VIDEO/AUTOSELECT/<out>/<in>.Priority=<prio_num>
æ pw·/V1/MEDIA/VIDEO/AUTOSELECT/<out>/<in>.Priority=<prio_num>
Parameters
The <prio> parameters means the priority number from 1 to 100, equal numbers are allowed. Inputs can
have different priorities in relation with two or more outputs. Therefore the output port number is part of the
node path of input port priorities.
Example
ç
æ
Command and Response
ç GET·<out>.ConnectedSource
æ pw·<out>.ConnectedSource=<in>
Example
ç
æ
To Next Page
Loading...
