Lindos LA100 - Index

Index
! character in tolerance 95
! tone segment 76, 78-80, 85
% conversion 149
% distortion tolerances 95
% segment (set impedance) 83
(‘SEQ ERROR 12’) 61
+ segment 62, 70
+5V supply 161
-99.9% 75
-99.9dB 77
-999° 75
/ segment (set sequence level) 84
/ to suppress printout values 95
0dB axis 117
19" rack mounting 9, 169-170, 193
19.003kHz 34
22-22kHz noise 73
22.5kHz sine waves 34
22Hz-22kHz bandwidth
19, 22, 41, 73, 102, 143
24 pin printers 117-118
2nd order difference frequency distortion
27, 77
400Hz distortion 194
400Hz high pass filter 30
400Hz normalisation 56, 192
400Hz test level 49, 192
400Hz test level4 72
50µs de-emphasis 74-75, 112
50µs pre-emphasis 35, 49, 112
5V regulator 161
600W 30-32, 84, 111, 134, 171-172
600W line tests 30
600W load 32
70Hz bandpass filter 28
75 baud 124-125
8W load 32
9 pin dot matrix printers 117
: segment (set channel) 84
= sign 95
> segment (call subroutine) 85
? segment (pause) 85
A
A weighted noise 22, 73
Abort printing 43
Absolute level 17, 22, 25, 28, 56, 73
Absolute results 56
Accessories 169
Acorn A3000 121, 169, 173
Acorn A4 121, 169, 173
Acorn A5000 121, 169, 173
AES14-1992 171
Aliasing on frequency measurement 21
Allowed range for results 89
Alphabet 69
Alternate sweeps 49
Amplifiers 111
Amplitude flatness 195
Amplitude range 15, 71, 195
Analogue meter 17, 111
Anechoic chamber 108
ANSI S4.48-1992 171
Anti-aliasing filters 50
Apple Imagewriter 13, 115
Application Note 10 24
Applications advice 14, 107
Applying a tolerance 92
AR autorange 139-140
ASCII character set 116, 125
ASK decoders 78
Asterisk (*) 89, 139
Asterisk (]) 89
Asymmetrical transfer characteristic 29
199