Lindos LA100 - Page 4

4.11 Wow & Flutter Segment (W) 75
4.12 Phase Segments (Y, Z, z) 75
4.13 User Level Segment (K) 75
4.14 Maximum Output Level (MOL) Segments (H, h) 76
4.15 Difference Frequency Distortion (d) 77
4.16 Tone Burst/Tones Segment (!) 78
4.17 Repeating Segments and Sequences (<) 81
4.18 Multiple Results Compartments 81
4.19 Selecting a Tolerance (±) 83
4.20 Output Impedance Segment (%) 83
4.21 Sequence Level Segment (/) 84
4.22 Channel Segment (:) 84
4.23 Subroutine Segment (>) 85
4.24 Pause Segment (?) 85
4.25 Sweep Headroom (^n) 85
4.26 Subtract a Reference Curve (\n) 86
4.27 Equivalent ! Segments 86
4.28 CCITT O.33 Sequences 87
4.29 Apply weighting (=n) 88
5.0 Tolerance Testing 89
5.1 Applying a Tolerance 92
5.2 Pre-Defined Tolerances 92
5.3 Tolerance Strings 93
5.4 The Tolerance Definition 93
5.5 Printout Format 95
5.5 Printout Format 95
5.6 The LA102 Tolerance Editor 96
5.7 Editing Tolerances on a Remote Computer 98
5.8 Example Tolerance 98
6.0 Using Test Tapes and Discs 101
6.1 Test Tape Mode 101
6.2 Frequency Sweep Mode 103
6.3 Frequency Response Results 104
6.4 Automatic W&F Measurement on Test Tapes 104
7.0 Applications Advice 107
7.1 Tape Machines 107
7.2 Loudspeakers 108
7.3 Microphones & Low Level Inputs 108
7.4 Lines, Links & Networks 109
4