Need help?Do you have a question about the LINET Virtuoso and is the answer not in the manual?
General| Thighrest angle | 0 - 30° |
|---|---|
| External length | 2070 mm |
| Wavelength | Not applicable (bed, not a laser device) |
| Pulse Duration | Not applicable (bed, not a laser device) |
| Energy per Pulse | Not applicable (bed, not a laser device) |
| Repetition Rate | Not applicable (bed, not a laser device) |
| Spot Size | Not applicable (bed, not a laser device) |
| Cooling System | Not applicable (bed, not a laser device) |
Explains different types and structures of warning notices used in the manual.
Describes symbols for instructions and list levels used within the manual.
Details various symbols found on the product and their meanings, including fuse ratings and indicator lights.
Provides crucial instructions for safe operation, handling, and maintenance of the mattress system.
Outlines environmental requirements for operating and storing the Virtuoso mattress system.
Explains the intended use, modes of operation (ALP, CLP), and suitability of the Virtuoso mattress system.
Lists specific patient conditions and situations where the Virtuoso mattress system should not be used.
Details the construction and components of the Virtuoso mattress, including top and bottom decks and cell structure.
Describes the System Control Unit (SCU), its function in inflating/deflating the mattress, and its alarm system.
Instructs users to check shipment completeness and report any deficiencies or damages upon receipt.
Enumerates all items included in the delivery package of the Virtuoso mattress system.
Provides step-by-step instructions and safety precautions for installing the mattress onto a bed frame.
Details the process for safely installing the SCU, including fitting the mains cable and securing it to the bed.
Explains how to connect the air connector from the mattress to the SCU socket.
Guides on how to safely route and manage the cables to prevent hazards and damage.
Describes the process of inflating the mattress using the SCU, including switching on/off and indicator lights during inflation.
Essential steps before patient placement, including mattress inflation checks, safety warnings, and patient positioning.
Provides an overview of the SCU control panel, detailing each button, indicator, and their functions.
Explains the function of the GO button for activating the SCU control panel and its timeout.
Describes how to mute audio alarm signals and the behavior of recurring alarms.
Details how the SCU controls and adjusts air pressure, including manual adjustments and recommended levels.
Explains the Alternating Pressure Therapy (APT) mode, its activation, and operation cycles.
Describes the MAX mode for maximum inflation, its duration, and automatic switch-back behavior.
Details the Constant Low Pressure (CLP) mode, its function, and indicator behavior.
Explains how the SCU automatically adjusts pressure when the patient's backrest is raised or lowered.
Covers battery charge status, power supply warnings, and battery maintenance, including back-up pack installation.
Explains the CPR/Air Disconnected mode activation, indicators, and how to stop the alarm.
Details how to identify and respond to system errors, including indicator lights and audio alarms.
Provides recommendations for SCU maintenance based on operating hours and indicator lights.
Instructions for initiating resuscitation with the SCU connected, including pressing the CPR button.
How to allow resuscitation in Transport mode by rotating the air connector until air escapes.
Explains how to activate Transport mode for bed transportation without air loss, and its limitations.
Discusses implications of power failure, including mattress inflation retention and the need for medical advice.
Describes the function and configuration of the head/heel zone selector for specialized nursing procedures.
Explains the purpose and operation of the seating system for non-bed-ridden patients.
Provides safety warnings and steps for installing the seat cushion onto a chair.
Details the initial inflation process for the seat cushion, including indicator lights and confirmation signals.
Instructions on how to use the seat cushion, including preparation and patient seating.
Outlines general cleaning precautions and recommends specific cleaning agents and methods.
Step-by-step guide for routine cleaning of the mattress, SCU, and air pipe.
Procedures for comprehensive cleaning and disinfection of mattress, cover, and SCU.
Instructions on how to remove the mattress cover for cleaning or replacement.
Information on the product's environmental compatibility and disposal of packaging materials.
Specific instructions for disposing of the SCU and battery pack.
Lists detailed mechanical properties of the mattress, seat cushion, and SCU, including dimensions and weight.
Provides electrical details such as supply voltage, power, fuses, and safety class.
Details the product's compliance with electromagnetic radiation and resistance standards for various environments.
A form for recording delivery details and confirming personnel familiarization with the product.
A log for recording details of service performed and maintenance activities on the product.
To Next Page
