Lode BV Excalibur Sport
56
7. Confirm the S with NEXT( ), use the ▼ key to decrease the workload to 10 watt.
8. Press the confirmation button NEXT until you reach the following screen. Adjust time
dt to 60 seconds using the ▼▲ keys.
9. Select T with the ▼▲ keys and adjust the Torque to 10 Nm and the duration to 30
seconds with the same keys. Press the confirmation button.
10. Select L with the ▼▲ keys and confirm the constant α=0.041, change the duration to
10 seconds. Press the confirmation button.
11. Select H with the ▼▲ keys and change the heart rate in 120/m for a duration of 180
seconds, press the confirmation button.
test
Torq P= 10W t=01:00
2T T= 10Nm dt=030
s
back ok
test
Step P= 0W t=00:00
1S
dP=+050W dt=060s
esc next
test
Step P= 00W t=00:00
1S dP=+010W dt=060
s
back next
test
Step P= 00W t=00:00
1S dP=+010
W dt=060s
back next
test
Lin P= 10W t=01:30
3L α=.041 dt=010
s
back next
To Next Page
Loading...
