Page 9 / 43
Danger: when changing the desktop position, there may in exceptional
cases be a risk of pinching in spite of the safety features. You must
therefore always ensure that no people or objects are located in the
hazardous area or reach into it.
Danger: do not modify or make any changes to the control unit, the
controls themselves or handswitches.
Danger: do not operate the COMPACT control unit in a potentially
explosive atmosphere.
Danger: in the event of a fault (motor or component), whenever the
desktop attempts to adjust the height it may move slightly before the
safety cut-out is triggered. Please note that there is a potential risk of
pinching in this case.
Danger: intelligent system protection (ISP) is not enabled during all
resets (see 4.2.4) and limit position calibration (see 4.2.6). Please note
that there is a potential risk of pinching in this case.
Danger: this device is not intended for use by individuals (including
children) with limited physical, sensory or mental abilities or with a lack of
experience and/or lack of expertise, unless they are supervised by a
person responsible for their safety or have received instructions from that
person on how to use the control unit.
Danger: children must be supervised at all times to ensure that they do
not play with the control unit.
Danger: if the control unit’s power cord is damaged, it must be replaced
by the manufacturer or customer service or similarly qualified person in
order to prevent any risks.
Note: only clean the COMPACT control unit with a dry or slightly moist
cloth. Before cleaning, you must always unplug the power cord.
Note: in case of a mains power breakdown or if the power cord is
plugged off during the movement of the drives, a manual reset of the
COMPACT may be necessary!
To Next Page
Loading...
Need help?
General
