Loma IQ3+ST - Setting up the Monitoring Services

Operating Instructions
179
4. You can now select the required options and enter the appropriate parameter values to set
up the service options. See the Service Options screen section for further details.
5.
Once you have entered the required details, tap on the Back button
to display the Save
Settings pop-up screen. Then tap on the green tick 'OK' button to save the changes.
Setting Up the Monitoring Services
The metal detector provides monitoring of the status for a number of selectable machine features,
where fitted, through the GP I/O screen.
Note that GP I/O needs to be set to Enabled in the Search Head Setup screen for it to be
available for use.
To set up the monitoring services, proceed as follows:
screen. Then proceed as follows:
1. In the System Settings screen, tap on the Advanced icon to display the Advanced Settings
screen.