Appendix D
9-15
9.2 Procedure for reverting to the previous version of firmware
To abandon the current firmware, and return to previous version of the firmware.
The current firmware is in BANK 2.
LOOP V4200-9 === Download Firmware === 16:26:18 08/18/2003
ARROW KEYS: CURSOR MOVE, Please Input: nnn.nnn.nnn.nnn, BACKSPACE to edit
Current Software Ver.: V3.08 05/28/2003
Current Firmware Bank: 2
NextBootFirmware Bank: 2
TFTP Server IP : 192.168.100.206
Firmware File Name :
<< Press ESC key to abort, ENTER key to continue >>
1. Power down the Loop-V 4200-9.
2. Press the “<” ”>” key on the front panel of theLoop-V 4200-9 and power up the V4200-9.
3. Press L from the Controller Menu. The following screen will appear.
LOOP V4200-9 ===Download/Upload Firmware === 16:25:51 08/18/2003
>> Select ? *DOWNLOAD UPLOAD
4. Use the arrow keys to move the cursor to DOWNLOAD. Then press Enter.
5. The following screen will apear showing that the files are now located in a different firmware bank.
LOOP V4200-9 === Download Firmware === 16:26:18 08/18/2003
ARROW KEYS: CURSOR MOVE, Please Input: nnn.nnn.nnn.nnn, BACKSPACE to edit
Current Software Ver.: V3.07 01/01/2003
Current Firmware Bank: 1
NextBootFirmware Bank: 1
TFTP Server IP : 192.168.100.206
Firmware File Name :
<< Press ESC key to abort, ENTER key to continue >>
To Next Page
Loading...