Loop Telecom Loop-V 4200 - System Alarm Setup; Firmware Download

Chapter 5 Terminal Operation
5-7
5.5 System Alarm Setup
Press “M” to change and enable the alarm setup.
LOOP V4200-9 === System Alarm Setup === 09:25:55 07/19/2000
ARROW KEYS: CURSOR MOVE, TAB: ROLL OPTIONS
[Alarm Action]
ALARM : DISABLE
RELAY : DISABLE
[Alarm Type]
ALARM CUT OFF : DISABLE
PORT INACTIVE : DISABLE
PORT START-UP : DISABLE
CLK LOSS ALM : DISABLE
<< Press ESC key to return to previous menu >>
5.6 Firmware Download
Press “L” to change the version of controller firmware. Move the cursor to "DOWNLOAD". The current
selection will be highlighted by an asterisk (*).
LOOP V4200-9 ===Download/Upload Firmware === 17:34:36 04/19/2001
>> Select ? *DOWNLOAD UPLOAD
Press ENTER from the above screen. The following screen will show.
LOOP V4200-9 === Download Firmware === 09:25:55 07/19/2000
ARROW KEYS: CURSOR MOVE, Please Input: nnn.nnn.nnn.nnn, BACKSPACE to edit
Current Software Ver.: V1.18 02/04/1999
Current Firmware Bank: 2
NextBootFirmware Bank: 2
TFTP Server IP : 000.000.000.000
Firmware File Name :
<< Press ESC key to return to previous menu >>