Loop Telecom Loop-V 4200 - Mdsl Port; Qfxs Port; Qfxo Port

Chapter 4 Front Panel Operation
4-7
4.2.4.4 MDSL PORT
From the Configuration menu, use the arrow keys to select the TSI-Map menu.
Then use the arrow keys to select the MDSL card, in this case, port H.
TSIMAP>Select Port:<MDSL>
A B C D E F H J K Z
After pressing ENTER from the above LCD, the following LCD will be displayed.
MAP>[iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii]
H_01(MDSL,d,NULL)<->IDLE
4.2.4.5 QFXS PORT
From the Configuration menu, use the arrow keys to select the TSI-Map menu.
Then use the arrow keys to select the QFXS card, in this case, port E.
TSIMAP>Select Port:<QFXS>
A B C D E F H J K Z
After pressing ENTER from the above LCD, the following LCD will be displayed.
MAP>[iiii]
E_01(QFXS,d,NULL)<->IDLE
4.2.4.6 QFXO PORT
From the Configuration menu, use the arrow keys to select the TSI-Map menu.
Then use the arrow keys to select the QFXO card, in this case, port E.
TSIMAP>Select Port:<QFXO>
A B C D E F H J K Z
After pressing ENTER from the above LCD, the following LCD will be displayed.
MAP>[iiii]
E_01(QFXO,d,NULL)<->IDLE