Loop Telecom Loop-V 4200 - Bantam Jack; Figure 3- 1 Bantam Jack Block Diagram

Chapter 3 Operation
3-9
3.16 Bantam Jack
Figure 3-1 shows the block diagram of the bantam jack. Only "to-line" jacks for port A are provided. Users
are advised to use port A for the primary E1 or T1 line connection.
Figure 3- 1 Bantam Jack Block Diagram
Breaking jack
Tip and Ring connections in one
direction are broken when bantam plug
is inserted into breaking jack.
NET
MON
NET
IN
NET
OUT