Loop Telecom Loop-V 4200 - Port Menu; Dte Port; E1 Port; T1 Port

Chapter 4 Front Panel Operation
4-2
4.1 Port Menu
The main menu, the first menu displayed after power on, is shown below. The main menu of the Loop-V
4200 includes port, controller, alarm, status, and miscellaneous menus.
Loop V4200-9
<< PORT CONTROLLER ALARM STATUS MISC >>
4.1.1 DTE PORT
Use the arrow keys to select a port for the DTE interface card. In this case, port A.
PORT> Select Port: <DTE>
A B C D E F H J K
Other interface cards will look similar to this menu.
4.1.2 E1 PORT
Use the arrow keys to select a port for the E1 interface card. In this case, port B.
PORT> Select Port: <FE1>
A B C D E F H J K
4.1.3 T1 PORT
Use the arrow keys to select a port for the T1 interface card. In this case, port E.
PORT> Select Port: <FT1>
A B C D E F H J K
4.1.4 MDSL PORT
Use the arrow keys to select a port for the MDSL interface card. In this case, port H.
PORT> Select Port: <MDSL>
A B C D E F H J K