Smart Motion Detection14
• Install the camera between 8-16ft (2.5-5m) off of the ground.
NOTE
Accuracy of Person & Vehicle detection will be influenced by multiple factors, such as the object’s distance from
the camera, the size of the object, and the height and angle of the camera. Night vision will also impact the accu-
racy of detection.
14.2 Configuring Person & Vehicle Detection
Set preferences for person and/or vehicle detection per channel.
14.3 Searching for Person & Vehicle Detection Events (Smart Search)
Smart Search lets you filter recorded video to search for person detection events, vehicle detec-
tion events, or both.
NOTE
In order to use Smart Search, you must configure at least one channel’s smart detection settings. See the proce-
dure above for full instructions.
To perform a Smart Search:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click EVENTS. Click the Smart Search tab on the side panel, then in the drop-down click
Smart Motion.
3. Select a channel to search for detection events from, or select All.
4. Enter a start and end time for your search.
5. Next to Event Type, select Person, Vehicle, or All.
#LX400113; r. 9.0/57191/57191; en-US 46
To Next Page
Loading...
Need help?
General