Using the Main Menu17
2. Click CAMERA, then click Registration on the side panel. Click the Status tab on the top
panel.
17.4.2 Camera Firmware Versions
View firmware versions for connected cameras.
To view camera firmware versions:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click CAMERA, then click Registration from the side panel. Click the Firmware tab on
the top panel.
17.4.3 Upgrading Camera Firmware
You can update the firmware for connected IP cameras through the NVR. Firmware upgrades
provide enhanced functionality for the cameras. Typically, a camera firmware upgrade will not
be necessary unless directed to do so by technical support.
To upgrade the camera firmware:
1. Download the camera firmware file.
NOTE
Make sure that the firmware file you are using is compatible with your IP camera model.
2. Extract the firmware file and copy it to a USB thumb drive (not included).
3. Insert the USB thumb drive (not included) into a USB port on the system.
#LX400113; r. 9.0/57191/57191; en-US 60
To Next Page
Loading...
Need help?
General