Face Detection15
5. Click to enable Face ROI to enhance images captured through face detection.
6. Click Set next to Schedule to choose which days and times of the week to enable face
detection:
• Click or click-and-drag along the each of the blue timelines to quickly add or remove
time from each day’s schedule in 15–minute segments.
• Click
beside 2 or more days to link schedules ( ). This allows you to quickly
change multiple schedules at once.
• To make fine adjustments to a schedule, click
. This will allow you to set exact start
and end times for a schedule.
7. You can set various events to happen when the alarm is triggered including:
• Record Channel: Select the channels that will record when a face is detected on the se-
lected channel. Set the length of recording following a video loss event in the Post_REC
field.
• PTZ Activation: Set connected PTZ cameras to start a tour, pattern, or go to a preset
location.
• Sequence: Sequence mode will begin. Select the numbered tiles next to this option to in-
clude the corresponding channels in the sequence.
• Buzzer: Check to enable the system buzzer.
8. Click Apply.
9. (OPTIONAL) Click Copy to apply the settings for the current channel to one or more other
channels.
15.2 Face Preview
Faces captured through face detection can be previewed in the live view display, including a time
stamp and the channel the face was captured on.
#LX400113; r. 9.0/57191/57191; en-US 49
To Next Page
Loading...
Need help?
General