EasyManua.ls Logo

Lorex N862A63B - Replacing the Hard Drive; Removing the Hard Drive

Lorex N862A63B
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Replacing the Hard Drive21
The system comes with a pre-installed 3.5" SATA hard drive. You can replace the hard
drive with one up to a maximum size of 8TB, and add a second drive if you choose to.
21.1 Removing the Hard Drive
CAUTION
Make sure that the system is OFF and the power adapter is disconnected before removing/installing a hard drive.
To remove the hard drive:
1. Power off the system, and unplug all cabling from the system.
2. Turn the recorder over. Remove the bottom panel screws (6×).
#LX400113; r. 9.0/57191/57191; en-US 93

Table of Contents

Related product manuals