Using the Main Menu17
2. Click STORAGE, then click the HDD Manager tab on the side panel.
3. Select the hard dive you would like to format.
4. Click Format, then click Yes to confirm.
17.6.15 Configuring Hard Drive Type
The system supports the following hard drive types:
• Read/Write: Normal recording hard drive.
• Read-Only: The system can playback data from this hard drive, but it will not record to it.
To set the hard drive type:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click STORAGE, then click the HDD Manager tab on the side panel.
3. Select the hard drive type under the Type column next to the hard drive you would like to
configure.
#LX400113; r. 9.0/57191/57191; en-US 83
To Next Page
Loading...
Need help?
General