EasyManuals Logo

Lorex N881 Series User Manual

Lorex N881 Series
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #130 background imageLoading...
Page #130 background image
Troubleshooting21
When a malfunction occurs, it may not be serious and can be corrected easily. The following de-
scribes the most common problems and solutions. Please refer to the following before calling Lor-
ex technical support:
Error Possible Causes Solutions
System is not receiving power,
or is not powering up.
Cable from power adapter is
loose or is unplugged.
Confirm that all cables are con-
nected correctly.
Confirm that the power adapter
is securely connected to the
back of the unit.
Cables are connected, but sys-
tem is not receiving sufficient
power.
Confirm that the system is pow-
ered on (LED indicators on the
front should be ON).
If the unit is connected through
a power bar or surge protector,
try bypassing the bar and con-
necting the power directly to the
wall outlet.
Confirm that there is power at
the outlet:
Connect the power cable to
another outlet.
Test the outlet with another
device (such as a lamp or
phone charger).
Hard drive is not detected by
the system.
Hard drive cables are loose or
not properly connected.
Remove the housing and check
that hard drive cables are firmly
connected.
There is no hard drive in the
system.
Open the housing and install
compatible hard drive. Make
sure to format the drive after in-
stalling. For details, see 19 Re-
placing the Hard Drive, page
113.
Hard drive is full (0%) and the
unit is no longer recording.
Overwrite is not enabled. See 9.5 Configuring Hard Drive
Overwrite, page 27 for full in-
structions on enabling hard
drive overwrite.
There is no picture on monitor/
TV after connecting it to the
system.
Monitor/TV not detected by
system.
Power off the monitor/TV and
system. Power on the monitor/
TV, and then power on the
system.
Input channel for system not se-
lected on monitor/TV.
On the monitor/TV, select the
input channel the system is con-
nected to.
Video cable is loose or has be-
come disconnected.
Check the video cable connec-
tion to the system and monitor/
TV.
Camera is not compatible with the
recorder.
Visit lorex.com/compatibility and
navigate to N881 Series for a list of
all compatible cameras.
#LX400113; r. 3.0/56326/56332; en-US 122

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lorex N881 Series and is the answer not in the manual?

Lorex N881 Series Specifications

General IconGeneral
BrandLorex
ModelN881 Series
CategoryDVR
LanguageEnglish

Related product manuals