Lorex N881 Series User Manual

Using the Main Menu16
2. Click
, then click EVENT. Click the LOCAL ALARM tab on the side panel.
3. Select the alarm input port the device is connected to.
4. Check Enable.
5. Select NO (Normal Open) or NC (Normal Close) depending on the type of alarm input de-
vice you have.
6. Click Setup next to Schedule to configure the times of the week when the selected device will
be activated. By default, the device will be activated 24/7.
• Click or click-and-drag along each of the red timelines to quickly add or remove time from
each day’s schedule in 30–minute segments.
• Click
beside 2 or more days to link schedules ( ). This allows you to quickly
change multiple schedules at once.
• To make fine adjustments to a schedule, click Set. This will allow you to set exact start and
end times for a schedule.
• Click OK when finished.
#LX400113; r. 3.0/56326/56332; en-US 87

Lorex N881 Series Specifications

General

Brand	Lorex
Model	N881 Series
Category	DVR
Language	English