Menu Parameter Values Meaning
Set Logger: Adjustment of the data logger function **
Selection of the data logger function *
CYCL Cyclic: Logger function of cyclical logger
Stor Store: Logger function
Single value logger
oFF No logger function
Only with
0:01 ... 60:00 Cycle time in [minutes:seconds] with
cyclical logger
**
Set Clock: Adjustment of the real time clock
HH:MM Clock: Adjustment of the clock
hours:minutes
YYYY Year: Adjustment of the calendar
year
DD.MM Date: Adjustment of the date day.
month
rEAd CAL: Review calibration data points:
see Chapter 12.2 Calibration data memory (rEAd CAL)
(*) If there is data in the logger memory, parameters marked with (*) cannot be opened.
If they need to be changed, the data must first be deleted!
(**) With the logger running, parameters marked with (**) cannot be opened.
To Next Page
Loading...
