3. AN, AS type is not available for S Meter
Charge method : Charging completion contact(1b) is basically installed
Automatic spring discharge device
Automatic spring discharge device
Lifting Hook
TRIOU(Remote Closing/Trip, Modbus is basically installed) additional function(Multiple selection is available)
Condensor Trip Device(CTD) Voltage Divide Module(VDM)
Profibus-DP Comm Temperature Monitoring
Note 3)
4. P(Power), S(Supreme) Meter is also available for Generator protection 5. P, S Meter needs the accessory(VDM) for voltage measurement
Electrical Remote Reset