93
Accessories
I
1. Externals
Prevent the arc which may arise and result in short-circuit between
phases in advance
The installation methods are divided into Fixed type and Draw-out type.
(Common use for all types)
As “C” stands for “CRADLE”, install the insulating barrier in the direction
of “C” in case of Draw-out type.
As “A” stands for ACB main frame, install the insulating barrier in the
direction of “A” in case of Fixed type.
The red dotted line on the figures shown below indicates the assembling
parts of insulating barrier.
2. Installation Method
Insulating Barrier Between Poles / Phases
Inserting
direction
to Cradle
Inserting
direction
to main
body
Draw-Out Type
Fixed Type
1. Main Body Mounting
To Next Page
Loading...
