Chapter 2. Installation
Protect from high temperature and high moisture and/or direct sunlight.
Install the inverter inside a “totally enclosed” panel to protect against oil mist,
water or dust.
When two or more inverters are installed inside a panel, the inverters and fans
must be installed in proper positions with extreme care.
Install the inverter using screws or bolts to insure the inverter is firmly fastened.
< For installing multiple inverters in a panel >
Caution
Arrange hot air from the inverters is discharged when installing them
on a panel. ‘X’ shows incorrect layout example.
Caution
A fan is to be installed so that the air inside the inverter is well
discharged as seen in the left figure. ‘X’ shows an example of
reduced cooling effect, possibly causing the inverter to overheat.
To Next Page
Loading...
