Chapter 5. Loader
When types of faults occur at the same time
Note
In case inverter trip occurs, it shows the type in the current fault status indication
code. In the case, if clearing it away by resetting or turning it off, fault info is
moved to fault history(P 1) of PG Group.
However, if any, the existing fault history moves from (P 1) to (P 2) or from (P 2)
to (P 3); the latest fault info is saved in (P 1) through (P 3).
When Overcurrent(OCt), overvoltage(Ovt) and overheat(OHt) occur
simultaneously
-. When various trips occur simultaneously, it shows like the figure above and it
can show up to 3 trips.
Overcurrent
Overvoltage
Overheating
Drive
To Next Page
Loading...
Need help?
General
