LS Industrial Systems SV-iE5 Series User Manual

Instructions
iv
 In case of input voltage unbalance, install AC reactor. Power Factor capacitors
and generators may become overheated and damaged due to potential high
frequency noise transmitted from inverter.
 Before operating unit and prior to user programming, reset user parameters to
default settings.
 Inverter can easily be set to high-speed operations, Verify capability of motor or
machinery prior to operating unit.
 Stopping torque is not produced when using the DC-Break function. Install
separate equipment when stopping torque is needed.
(5) Fault prevention precautions
 Provide a safety backup such as an emergency brake which will prevent the
machine and equipment from hazardous conditions if the inverter fails.
(6) Maintenance, inspection and parts replacement
 Do not conduct a megger (insulation resistance) test on the control circuit of the
inverter.
(7) Disposal
 Dispose of the inverter as treating industrial waste.
(8) General instructions
 Many of the diagrams and drawings in this instruction manual show the inverter
without a circuit breaker, a cover or partially open. Never run the inverter like
this. Always place the cover with circuit breakers and follow this instruction
manual when operating the inverter.

LS Industrial Systems SV-iE5 Series Specifications

General

Brand	LS Industrial Systems
Model	SV-iE5 Series
Category	Inverter
Language	English