LSIS SV-iG5A Series User Manual

7-6
z Frequency setting via Digital Volume (up-down)
Group Code Parameter Name Setting Range Initial Unit
Drive
group
0.0 [Frequency Command] - 0 ~400 0.00 Hz
Frq [Frequency Mode] 8
0 ~ 8 0
 Select 7 in Frq code of Drive group.
 Related code: I 59, I 60, I 61
 Refer to Chapter 13. RS485 communication.
z Analog Hold
Group Code Parameter Name Setting Range Initial Unit
Drive
group
Frq [Frequency Mode] 2 ~ 7
0 ~ 7 0
I/O group I17
[Multi-function input terminal
P1 define]
-
0 ~25
0
~ ~
I24
[Multi-function input
terminal P8 define]
23
7
 It is available when Frq code setting is 2 ~ 7.
 Select one terminal to use for Analog Hold command among Multi-function input terminal
(P1 ~ P8).
 When P8 terminal is selected,
Frequency
P8
Operation
command
Set freq.

LSIS SV-iG5A Series Specifications

General

Brand	LSIS
Model	SV-iG5A Series
Category	Inverter
Language	English