LSIS XBF-AH04A

XGB Analog edition manual
(3) ALM LED flickers.
(4) Temperature conversion value is not normal.
ALM LED flickers.
Sensor wiring is normal.
Wire properly referring to wiring method of user manual.
.
Contact the nearest agency or LS branch office .
No
Yes
Temperature conversion value is not normal.
External DC 24V input power is normal.
PE ground is normal.
Supply external power (DC 24V)
Execute PE ground properly referring to user
manual
Parameter setting is normal.
(Channel status, sensor type)
No
Yes
No
Yes
Contact the nearest agency or LS branch office .
No
Yes
Set parameter properly referring to user manual.
5 - 58